No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ldap-server authentication

ldap-server authentication

Function

The ldap-server authentication command configures an LDAP authentication server.

The undo ldap-server authentication command deletes an LDAP authentication server.

By default, no LDAP authentication server is configured.

Format

ldap-server authentication ip-address [ port-number ] [ secondary | third ] [ ssl ]

undo ldap-server authentication [ secondary | third ]

Parameters

Parameter Description Value
ip-address Specifies the IP address of an LDAP authentication server. The value is in dotted decimal notation.
port-number Specifies the port number of an LDAP authentication server.

The value is an integer that ranges from 1 to 65535. The default value is 389. If the ssl parameter is specified, the default value is 636.

The port number must be the same as that on the LDAP server.

NOTE:
If the ssl parameter is specified, the default value 636 is used if the configured port number is 389.
secondary Indicates the secondary LDAP authentication server. -
third Indicates the third LDAP authentication server. -
ssl This parameter must be specified when the LDAP authentication between the device and LDAP server uses LDAP over SSL. The device uses a CA certificate to authenticate the LDAP server. -

Views

LDAP server template view

Default Level

3: Management level

Usage Guidelines

During LDAP authentication, LDAP is used in interaction between the device and LDAP server. The LDAP data transmission is not encrypted. For security, you can use LDAP based on SSL for encrypted transmission. LDAP server certificates need to be imported into the device to authenticate the LDAP server.

When the LDAPS server is used for authentication, you need to run the certificate-check none command in the default PKI realm view to disable the function of checking whether a certificate is revoked.

Example

# Configure the primary LDAP authentication server.

<Huawei> system-view
[Huawei] ldap-server template temp1
[Huawei-ldap-temp1] ldap-server authentication 10.1.1.1 389
# Configure the primary LDAPS authentication server.
<Huawei> system-view
[Huawei] ldap-server template temp1
[Huawei-ldap-temp1] ldap-server authentication 10.1.1.1 636 ssl
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207906

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next