No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display flexible-radio status

display flexible-radio status

Function

The display flexible-radio status command displays the status and switching result of the redundant radio.

Only cloud APs support this command.

Format

display flexible-radio status

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display flexible-radio status command to check the status and switching result of the redundant radio.

Example

# Display the status and switching result of the redundant radio.
<Huawei> display flexible-radio status
Recognize time :00:00:00 2018/03/01
----------------------------------------------------------
AP ID  Name            RfID  Band ST  Redundancy Result
----------------------------------------------------------
2      9c50-ee6f-1ea0  0     2.4G on  R
3      28a6-dbc5-eae0  0     2.4G on  S(5G)
----------------------------------------------------------
Total:4
Table 10-3  Description of the display flexible-radio status command output

Item

Description

Recognize time

Time when the redundant radio is identified.

AP ID

AP ID.

Name

AP name.

RfID

Radio ID.

Band

Frequency band of the radio.

ST

Radio status.

Redundancy Result

Switching result of the redundant radio.
  • R: The current radio is a redundant radio that has not been switched.
  • S(5G): The redundant radio is switched to the 5 GHz mode.
  • S(monitor): The redundant radio is switched to the monitor mode.
  • S(off): This redundant radio is disabled.
  • -: This radio is not a redundant radio.
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205626

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next