No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wired-port-profile (AP group view and view)

wired-port-profile (AP group view and view)

Function

The wired-port-profile command binds an AP wired port profile to an AP or AP group.

The undo wired-port-profile command unbinds an AP wired port profile from an AP or AP group.

By default, the AP wired port profile default is bound to an AP group, but no AP wired port profile is bound to an AP.

Format

wired-port-profile profile-name interface-type interface-number

undo wired-port-profile interface-type interface-number

Parameters

Parameter

Description

Value

profile-name

Specifies the name of an AP wired port profile.

The AP wired port profile must exist.

interface-type interface-number

Specifies the type and number of an AP wired interface.

-

Views

AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you create an AP wired port profile using the wired-port-profile (WLAN view) command, bind it to an AP or AP group so that the AP wired port profile can take effect.

Precautions

After an AP wired port profile is bound to an AP or AP group, parameter settings in the AP wired port profile apply to specified interfaces of all APs using the AP wired port profile.

Example

# Create the AP wired port profile wired-port1 and bind it to GE0 of APs in AP group group1.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] wired-port-profile name wired-port1
[Huawei-wlan-wired-port-prof-wired-port1] quit
[Huawei-wlan-view] ap-group name group1
[Huawei-wlan-ap-group-group1] wired-port-profile wired-port1 gigabitethernet 0
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207389

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next