No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
update abort

update abort


The update abort command aborts the update process.


update abort




System view

Default Level

3: Management level

Usage Guidelines

The update abort command can only be used for online/immediate updates or update retries. In online/immediate updates, the device needs to connect to the update center. If the network rate is too low and impacts the services and device performance, you can run the update abort command to abort the update and then retry updating when appropriate. In update retires, you cannot perform other update operations. If you need to use another update method, run the update abort command to abort the update process first.


# Abort the update process.

<Huawei> system-view
[Huawei] update online cnc
[Huawei] update abort
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196683

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next