No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwtacacs-server source-ip

hwtacacs-server source-ip

Function

The hwtacacs-server source-ip command specifies the source IP address used by a device to communicate with an HWTACACS server.

The undo hwtacacs-server source-ip command cancels the configuration.

By default, the device uses the IP address of the actual outbound interface as the source IP address encapsulated in HWTACACS packets.

Format

hwtacacs-server source-ip ip-address

hwtacacs-server source-ip source-loopback interface-number

undo hwtacacs-server source-ip

Parameters

Parameter Description Value
ip-address Specifies the source IP address for communication between the device and HWTACACS server. The value is a valid unicast address in dotted decimal notation.
source-loopback interface-number

Specifies the IP address of the LoopBack interface as the source IP address for communication between the device and HWTACACS server.

The loopback interface must already exist.

Views

HWTACACS server template view

Default Level

3: Management level

Usage Guidelines

You can configure all HWTACACS packets sent by the device to use the same source IP address. In this way, an HWTACACS server uses only one IP address to communicate with the device.

Example

# Specify the source IP address 10.1.1.1 for communication between the device and HWTACACS server.

<Huawei> system-view
[Huawei] hwtacacs-server template test1
[Huawei-hwtacacs-test1] hwtacacs-server source-ip 10.1.1.1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196668

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next