No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
smart-roam quick-kickoff-snr check-interval

smart-roam quick-kickoff-snr check-interval

Function

The smart-roam quick-kickoff-snr check-interval command configures the interval for checking the SNR to determine whether to quickly disconnect STAs.

The undo smart-roam quick-kickoff-snr check-interval command restores the default interval for checking the SNR to determine whether to quickly disconnect STAs.

The default interval for checking the SNR to determine whether to quickly disconnect STAs is 500 ms.

Format

smart-roam quick-kickoff-snr check-interval check-interval

undo smart-roam quick-kickoff-snr check-interval

Parameters

Parameter

Description

Value

check-interval check-interval

Specifies an interval for checking the SNR to determine whether to quickly disconnect STAs.

The value is an integer that ranges from 300 to 3000, in milliseconds.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the mode for quickly disconnecting STAs is set to check-snr, you can run the smart-roam quick-kickoff-snr check-interval command to set the interval for checking the SNR to determine whether to quickly disconnect STAs. A shorter interval allows the system to determine whether to disconnect STAs more quickly.

Prerequisites

The function of quickly disconnecting STAs has been enabled using the undo smart-roam quick-kickoff-threshold disable command.

Example

# Set the interval for checking the SNR to determine whether to quickly disconnect STAs to 600 ms.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rrm-profile name default
[Huawei-wlan-rrm-prof-default] undo smart-roam quick-kickoff-threshold disable
[Huawei-wlan-rrm-prof-default] smart-roam quick-kickoff-snr check-interval 600
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207093

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next