No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
vlan vlan-name

vlan vlan-name


The vlan vlan-name command displays the view of a VLAN with the specified VLAN name.

The undo vlan vlan-name command deletes a VLAN with the specified VLAN name. After the command is used, the VLAN name is also deleted.


vlan vlan-name vlan-name

undo vlan vlan-name vlan-name


Parameter Description Value
vlan-name Specifies the VLAN name. The name is a string of 1 to 31 case-sensitive characters, spaces not supported.


System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the name command is run to set a VLAN name, you can run the vlan vlan-name command in the system view to enter the corresponding VLAN view.

Assume that a device has multiple VLANs and each VLAN has a name. If you need to delete the VLAN that is used to transmit voice services but cannot remember the ID of the VLAN, you can run the undo vlan vlan-name command to delete the VLAN by inputting the VLAN name.


Before running the vlan vlan-name command, ensure that the name command is run to set the VLAN name.


When you run the undo vlan vlan-name command to delete a VLAN, services configured for the VLAN are deleted at the same time. The deleted services cannot be restored even if you recreate the VLAN. Therefore, exercise caution when running the undo vlan vlan-name command.


# Enter the view of the VLAN named user1.
<Huawei> system-view
[Huawei] vlan vlan-name user1
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202225

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next