No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ppp pap local-user

ppp pap local-user

Function

The ppp pap local-user command configures the user name and password to be sent from the local device to the remote device in PAP authentication.

The undo ppp pap local-user command deletes the configured user name and password.

By default, the local device sends a request to the remote device without the user name and password in PAP authentication.

Format

ppp pap local-user username password { cipher | simple } password

undo ppp pap local-user

Parameters

Parameter Description Value
username

Specifies the user name sent from the local device to the remote device in PAP authentication.

The value is a string of 1 to 64 case-sensitive characters without spaces.

cipher

Displays the password in cipher text.

-
simple

Displays the password in plain text.

NOTE:

When you specify simple, the password is saved in plain text in the configuration, which brings potential security risks. You are advised to specify cipher to save the password in cipher text.

-
password

Specifies the password sent from the local device to the remote device in PAP authentication.

The value is a case-sensitive character string without spaces. If simple is specified, the password is in plain text and contains 1 to 32 characters. If cipher is specified, the password is either in cipher text containing 24 to 68 characters, for example, %^%#9}Ms*h:=3@2+n(K*_tS+1PlG2gT'48:j!V.pJSW$%^%#, or in plain text containing 1 to 32 characters, for example, 214357.

Views

Dialer interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the authenticating device uses PAP as PPP authentication, configure the user name and password for PAP authentication on the authenticated device.

In PAP authentication, the local device needs to send the user name and password to the remote device. The remote device checks its user table to determine whether the local device passes the authentication or sends the user name and password to the remote authentication server.

Precautions

The user name and password configured by using the ppp pap local-user command must be the same as those configured on the remote device.

In PAP authentication, the password is transmitted in plain text on the network no matter whether you specify cipher or simple, which brings potential security risks.

Example

# Configure user name papuser1 and password huawei@123 on Dialer1.

<Huawei> system-view
[Huawei] interface dialer 1
[Huawei-Dialer1] ppp pap local-user papuser1 password cipher huawei@123
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194991

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next