No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent trap enable feature-name arp

snmp-agent trap enable feature-name arp

Function

The snmp-agent trap enable feature-name arp command enables the trap function for the ARP module.

The undo snmp-agent trap enable feature-name arp command disables the trap function for the ARP module.

By default, the trap function is enabled for the ARP module.

Format

snmp-agent trap enable feature-name arp [ trap-name { hwethernetarpspeedlimitalarm | hwethernetarpthresholdexceedalarm | hwethernetarpthresholdresumealarm | hwethernetarpipconflictevent } ]

undo snmp-agent trap enable feature-name arp [ trap-name { hwethernetarpspeedlimitalarm | hwethernetarpthresholdexceedalarm | hwethernetarpthresholdresumealarm | hwethernetarpipconflictevent } ]

Parameters

Parameter Description Value
trap-name Enables the traps of ARP events of specified types. -
hwethernetarpspeedlimitalarm Enables the alarm of ARP speed limit. -
hwethernetarpthresholdexceedalarm Enables the alarm of the number of ARP entries exceeding the upper threshold. -
hwethernetarpthresholdresumealarm Enables the alarm of the number of ARP entries falling below the upper threshold. -
hwethernetarpipconflictevent Enables the alarm of IP address conflict. -

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If you do not specify trap-name, all traps of the ARP module will be enabled.

Example

# Enables the trap function of ARP speed limit.

<Huawei> system-view
[Huawei] snmp-agent trap enable feature-name arp trap-name hwethernetarpspeedlimitalarm
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210677

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next