No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
multicast-rate

multicast-rate

Function

The multicast-rate command configures the multicast rate of wireless packets in a radio profile.

The undo multicast-rate command restores the default multicast rate of wireless packets in a radio profile.

By default, the multicast rate of wireless packets is not configured in a radio profile. That is, the multicast rate is set to auto-sensing.

Format

multicast-rate multicast-rate

undo multicast-rate

Parameters

Parameter

Description

Value

multicast-rate

Specifies the multicast rate of wireless packets in a radio profile.

Enumerated type.

The values are as follows in a 2G radio profile:
  • 1: 1 Mbps
  • 2: 2 Mbps
  • 5: 5.5 Mbps
  • 6: 6 Mbps
  • 9: 9 Mbps
  • 11: 11 Mbps
  • 12: 12 Mbps
  • 18: 18 Mbps
  • 24: 24 Mbps
  • 36: 36 Mbps
  • 48: 48 Mbps
  • 54: 54 Mbps
The values are as follows in a 5G radio profile:
  • 6: 6 Mbps
  • 9: 9 Mbps
  • 12: 12 Mbps
  • 18: 18 Mbps
  • 24: 24 Mbps
  • 36: 36 Mbps
  • 48: 48 Mbps
  • 54: 54 Mbps

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

After this command is run, the multicast rate of wireless packets is the configured value and irrelevant to the STA access mode.

If the configured multicast rate is not in the basic rate set and the STA does not support this rate, the STA cannot receive multicast data.

If you run the radio-type dot11b command in the 2G radio profile view to set the radio type to dot11b, and the 2G radio profile is applied to an AP, multicast-rate that takes effect on the 2 GHz radio of the AP is fixed as 1 Mbps, and multicast-rate configured in the 2G radio profile view does not take effect on the AP.

Example

# Set the multicast rate of wireless packets to 54 Mbps in the 2G radio profile.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] radio-2g-profile name default
[Huawei-wlan-radio-2g-prof-default] multicast-rate 54
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207843

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next