Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
shutdown interval
Function
The shutdown interval command sets the minimum interval for re-enabling an interface.
The undo shutdown interval command restores the default minimum interval for re-enabling an interface.
By default, the minimum interval for re-enabling an interface is 0 seconds.
Usage Guidelines
Usage Scenario
In some cases, for example, when parameters of an interface are modified but the modification does not take effect immediately, run the shutdown and undo shutdown commands to re-enable the interface. Then the modification can take effect. To shorten the waiting time, run the shutdown interval command to set the minimum interval for re-enabling an interface.
Precautions
The minimum interval configured using this command also applies to the restart command.
Previous
