No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display pppoe-client session

display pppoe-client session

Function

The display pppoe-client session command displays information about PPPoE sessions on the PPPoE client, including the session status and statistics.

Format

display pppoe-client session { packet | summary } [ dial-bundle-number number ]

Parameters

Parameter Description Value
packet

Displays the packet statistics of PPPoE sessions.

-
summary

Displays summary of PPPoE sessions.

-
dial-bundle-number number

Displays statistics about a specified PPPoE session.

If this parameter is not specified, statistics about all PPPoE sessions are displayed.

The PPPoE session must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To monitor PPPoE sessions on the PPPoE client, use this command to obtain the session status and statistics. You can locate PPPoE faults according to the command output.

Example

# Display the summary of all PPPoE sessions on the PPPoE client.

<Huawei> display pppoe-client session summary
PPPoE Client Session:
ID   Bundle  Dialer  Intf             Client-MAC    Server-MAC    State
1    1       1       Vlanif1          00e0fc030201  0819a6cd0680  UP
Table 7-2  Description of the display pppoe-client session summary command output

Item

Description

ID

ID of a PPPoE session.

Bundle

Dialer bundle of the PPPoE session.

Dialer

Number of the dialer interface.

Intf

Physical interface to which the dialer interface is bound.

Client-MAC

MAC address of the PPPoE client.

Server-MAC

MAC address of the PPPoE server.

State

Status of the PPPoE session.
  • IDLE: The PPPoE session is idle.
  • PADI: The PPPoE session is at the Discovery stage and a PPPoE Active Discovery Initiation (PADI) packet has been sent.
  • PADR: The PPPoE session is at the Discovery stage and a PPPoE Active Discovery Request (PADR) packet has been sent.
  • UP: The PPPoE session has been established successfully.

# Display packet statistics of all PPPoE sessions on the PPPoE client.

<Huawei> display pppoe-client session packet
PPPoE Client Session:
ID     InP        InO        InD         OutP       OutO       OutD
1      36         758        0           50         1222       0
Table 7-3  Description of the display pppoe-client session packet command output

Item

Description

ID

ID of a PPPoE session.

InP

Number of received packets.

InO

Number of received bytes.

InD

Number of incoming packets that are discarded.

OutP

Number of sent packets.

OutO

Number of sent bytes.

OutD

Number of outgoing packets that are discarded.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204677

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next