No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
icmp redirect send

icmp redirect send


The icmp redirect send command enables the system to send ICMP redirection packets.

The undo icmp redirect send command disables the system from sending ICMP redirection packets.

By default, the system sends ICMP redirection packets.


icmp redirect send

undo icmp redirect send




VLANIF interface view, loopback interface view

Default Level

2: Configuration level

Usage Guidelines

The command is used on the interface that receives ICMP packets.

ICMP redirection packets are a type of ICMP control packets. When the device detects that a host uses a non-optimal route, it sends an ICMP redirection packet to the host, requesting the host to change the route. The device also sends an ICMP redirection packet to the destination.


# Enable VLANIF100 to send ICMP redirection packets.
<Huawei> system-view
[Huawei] interface vlanif 100
[Huawei-Vlanif100] icmp redirect send
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195082

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next