No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
capwap source interface

capwap source interface

Function

The capwap source interface command configures the source interface that the Central AP uses to establish a CAPWAP tunnel with an RU.

The undo capwap source interface command restores the source interface that the Central AP uses to establish a CAPWAP tunnel with an RU to the default setting.

By default, no source interface is configured for the Central AP to establish a CAPWAP tunnel with the RU.

Format

capwap source interface { loopback loopback-number | vlanif vlan-id }

undo capwap source interface

Parameters

Parameter

Description

Value

loopback loopback-number

Configures a loopback interface as the source interface.

The value is an integer that ranges from 0 to 1023.

vlanif vlan-id

Configures a VLANIF interface as the source interface.

The value is an integer that ranges from 1 to 4094.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A Central AP uses the IP address of the specified interface as the source IP address. All RUs connected to the Central AP can learn this IP address and use the IP address to communicate with the Central AP.

Prerequisites

An IP address has been assigned to the specified loopback or VLANIF interface.

Example

# Configure a loopback interface as the source interface.

<Huawei> system-view
[Huawei] interface loopback 20
[Huawei-LoopBack20] ip address 192.168.10.1 24
[Huawei-LoopBack20] quit
[Huawei] capwap source interface loopback 20
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194743

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next