No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The parity command sets the parity bit of a user interface.

The undo parity command disables the parity check.

By default, no parity check is configured.


parity { even | none | odd }

undo parity


Parameter Description Value
even Specifies even parity check. -
none Specifies no parity check. -
odd Specifies odd parity check. -


User interface view

Default Level

3: Management level

Usage Guidelines

This function takes effect for only serial interfaces.


# Set the transmission parity bit on the console interface to odd parity.

<Huawei> system-view
[Huawei] user-interface console 0
[Huawei-ui-console0] parity odd
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194694

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next