No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
interface wan0

interface wan0

Function

The interface wan0 command switches from the system view to the WAN view.

Format

interface wan0

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

To perform deployment configurations for a cloud AP, run this command to enter the WAN view.

Example

# Display the WAN view.

<Huawei> system-view
[Huawei] interface wan0
[Huawei-WAN]
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207383

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next