No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display trunk resource

display trunk resource


The display trunk resource command displays trunk resources that have been used on a device.


display trunk resource




All views

Default Level

1: Monitoring level

Usage Guidelines

To learn about used trunk resources, run the display trunk resource command to check the number of created trunks and the number of interfaces added to the trunk interface.


# Display trunk resources used on a device.

<Huawei> display trunk resource
Number of configured trunk interfaces is : 4
Interface           Member Count
Eth-Trunk1          2
Eth-Trunk10         0
Eth-Trunk30         0
Eth-Trunk55         0 
Table 6-13  Description of the display trunk resource command output



Number of configured trunk interfaces is

Number of configured trunk interfaces.


Trunk interface type:
  • Eth-Trunk

Member Count

Number of member interfaces added to a trunk interface.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 201142

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next