No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap config-fail-record

display ap config-fail-record

Function

The display ap config-fail-record command displays records about AP configuration delivery failures.

Format

display ap config-fail-record { all | ap-id ap-id | ap-mac ap-mac }

Parameters

Parameter

Description

Value

all

Displays records about configuration delivery failures of all APs.

-

ap-id ap-id

Displays records about configuration delivery failures of an AP with the specified ID.

The AP ID must exist.

ap-mac ap-mac

Displays records about configuration delivery failures of an AP with the specified MAC address.

The AP MAC address must exist.

Views

Diagnostic view

Default Level

3: Management level

Usage Guidelines

You can run this command to view records about AP configuration delivery failures.

Example

# Display records about configuration delivery failures of all APs.

<Huawei> system-view
[Huawei] diagnose
[Huawei-diagnose] display ap config-fail-record all
Info: This operation may take a few seconds, please wait.done.
-----------------------------------------------------------------------------------------------------
MAC             Last fail time       Reason
-----------------------------------------------------------------------------------------------------
60de-4474-9640  2017-04-21/16:57:14  Password length not support(Phase: 5, ObjectType: 0, Attr: 38)
-----------------------------------------------------------------------------------------------------
Total records: 1
Table 18-3  Description of the display ap config-fail-record command output

Parameter

Description

MAC AP's MAC address.
Last fail time Time when the AP configuration delivery failed.
Reason Reason why the AP configuration delivery failed.
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204720

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next