No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent usm-user

display snmp-agent usm-user


The display snmp-agent usm-user command displays information about an SNMPv3 user.


display snmp-agent usm-user [ user-name ]


Parameter Description Value

Specifies an SNMPv3 user.

The value is a string of 1 to 32 case-sensitive characters without spaces.


All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The displayed information about an SNMPv3 user includes:
  • User name.
  • Local engine ID of the user. The SNMPv3 engine ID uniquely identifies an SNMPv3 agent in a management domain. The SNMPv3 engine ID is an important component of the SNMPv3 agent. It schedules and processes SNMPv3 messages, and implements security authentication and access control.


The display snmp-agent usm-user command is applicable only to SNMPv3 users.


# Display information about all current SNMPv3 users.

<Huawei> display snmp-agent usm-user
   User name: testuser                                                          
   Engine ID: 800007DB03548998F3A458                                            
   Group name: testgroup                                                        
   Authentication mode: md5, Privacy mode: des56                                
   Storage type: nonVolatile                                                    
   User status: active                                                          
   Total number is 1     
Table 28-13  Description of the display snmp-agent usm-user command output



User name

SNMPv3 user name, which identifies a user.

Engine ID

Engine ID corresponding to the SNMPv3 user.

Group name

SNMPv3 group name corresponding to the SNMPv3 user.

Authentication mode

Authentication mode for the SNMPv3 user:
  • md5
  • sha
  • No authentication mode

Privacy mode

Encryption mode for the SNMPv3 user:
  • des56
  • aes128

Storage type

Data storage type.
  • volatile: Lines are saved in the volatile storage medium and are lost after the device restarts.
  • nonVolatile: Lines are saved in the nonvolatile storage medium and are restored after the device restarts.
  • permanent: Permanent lines are saved in the nonvolatile storage medium. They can be modified but cannot be deleted.
  • readOnly: Readonly lines are saved in the nonvolatile storage medium. They cannot be modified or deleted.
  • other: other storage types.
At present, only nonVolatile is available.

User status

Status of the SNMPv3 user:
  • active
  • inactive

Total number

Number of SNMPv3 users.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207649

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next