No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
tcp timer syn-timeout

tcp timer syn-timeout


The tcp timer syn-timeout command configures the value of the TCP SYN-Wait timer.

The undo tcp timer syn-timeout command restores the default value of the TCP SYN-Wait timer.

By default, the value of the TCP SYN-Wait timer is 75s.


tcp timer syn-timeout interval

undo tcp timer syn-timeout


Parameter Description Value
interval Specifies the value of the TCP SYN-Wait timer. The value is an integer ranging from 2 to 600, in seconds. The default value is 75s.


System view

Default Level

2: Configuration level

Usage Guidelines

When an SYN packet is sent, the TCP SYN-Wait timer is started. If no response packet is received after the TCP SYN-Wait timer expires, the TCP connection is closed.

If you run this command in the same view for multiple times, only the last configuration takes effect.

You are advised to configure this parameter under the supervision of technical support personnel.


# Set the value of the TCP SYN-Wait timer to 100s.

<Huawei> system-view
[Huawei] tcp timer syn-timeout 100
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 201180

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next