No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wlan ble site-info

display wlan ble site-info

Function

The display wlan ble site-info command displays information about Bluetooth devices that are scanned by an AP's built-in Bluetooth module.

Only cloud APs support this command.

Format

display wlan ble site-info { all | mac-address mac-address | host-ap { valid | host-ap-id ap-id | host-ap-name ap-name } }

Parameters

Parameter Description Value
all Displays information about all Bluetooth devices. -
mac-address mac-address Displays information about a specified Bluetooth device.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

host-ap valid Displays information about APs' built-in Bluetooth modules among all Bluetooth device information. -
host-ap host-ap-id ap-id Displays information about the Bluetooth module built in an AP with the specified ID.

The AP ID must exist.

host-ap host-ap-name ap-name Displays information about the Bluetooth module built in an AP with the specified name.

The AP name must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After you enable the Bluetooth monitoring function using the sniffer enable command, an AP's built-in Bluetooth module scans surrounding Bluetooth devices and obtains their information. You can then run this command to view obtained information about Bluetooth devices scanned by the built-in Bluetooth module.

After the Bluetooth broadcast function is enabled for an AP with the built-in Bluetooth module, the Bluetooth module works as a Bluetooth station, whose information can be found in Bluetooth device information. If the Bluetooth MAC address label of an AP is lost, it is time-consuming to locate the mapping between the AP and built-in Bluetooth module. In this case, configure the host-ap parameter to filter out information about the AP's built-in Bluetooth module among all Bluetooth device information.

Example

# Display information about all Bluetooth devices.

<Huawei> display wlan ble site-info all
---------------------------------------------------------------------------------------------------------------------------------------------------
Index  MAC             Host AP ID Host AP name RSSI  Power Type       DetachedFlag Aging-Timeout(m)  Broadcast count Advertisement data
---------------------------------------------------------------------------------------------------------------------------------------------------
0      0000-0101-0202  4          AP4          -30   50%   asset-tag  N            57                10              02-02-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-fa
1      0000-0101-0303  --         --           -31   51%   asset-tag  N            57                7               01-02-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-fa
2      0000-0101-0505  12         AP12         -33   55%   asset-tag  N            57                16              03-02-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-fa
---------------------------------------------------------------------------------------------------------------------------------------------------
Total: 3
Table 21-6  Description of the display wlan ble site-info command output

Item

Description

Index

Index.

MAC

MAC address of a Bluetooth device.

Host AP ID

ID of the AP to which a Bluetooth device belongs. The display of -- indicates that Bluetooth device information does not belong to the built-in Bluetooth module of the AP.

Host AP name

Name of the AP to which a Bluetooth device belongs. The display of -- indicates that Bluetooth device information does not belong to the built-in Bluetooth module of the AP.

RSSI

Signal strength of a Bluetooth device received by an AP's built-in Bluetooth module.

Power

Battery power of a Bluetooth device. If no information about battery power is obtained, this item is displayed as --.

Type

Bluetooth device type. The options are as follows:
  • ibeacon: Bluetooth terminal
  • asset-tag: Bluetooth tag
  • sensor-tag: Bluetooth client

DetachedFlag

Whether a Bluetooth device is disconnected. The options are as follows:
  • Y: The Bluetooth device is disconnected.
  • N: The Bluetooth device is connected.
NOTE:
Bluetooth device disconnection check is not supported in Bluetooth monitoring or transparent transmission mode. This parameter is valid only when the Bluetooth device type is asset-tag.

Aging-Timeout(m)

Remaining aging time of a Bluetooth device. The maximum value is 60 minutes.

Broadcast count

Number of broadcast packets sent by a Bluetooth device.

Advertisement data

Content of data carried in a broadcast frame sent by a Bluetooth device. The maximum length of a displayed broadcast frame is 21 bytes.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202971

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next