No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display cloud-mng info

display cloud-mng info


The display cloud-mng info command displays the configuration of the Agile Controller-Campus.


display cloud-mng info




All views

Default Level

1: Monitoring level

Usage Guidelines

you can run this command to view the IP address, port number, device online status, and device online mode.


# Display the configuration of the Agile Controller-Campus in the user view.

<Huawei> display cloud-mng info
 AP status                :  Online                                             
 Controller URL           :  -                                                  
 Controller IP address    :                                           
 Controller port          :  10020                                              
 Controller address source:  configuration                                      
Table 3-1  Description of the display cloud-mng info command output



AP status

Whether the current device has gone online.

  • Offline: The device fails to go online.
  • Online: The device goes online successfully.

Controller URL

URL of the Agile Controller-Campus.

Controller IP address

IP address of the Agile Controller-Campus.

Controller port

Port number of the Agile Controller-Campus.

Controller address source

Mode in which the current device goes online.

  • configuration: The device goes online using the CLI.
  • DHCP: The device goes online using DHCP.
  • register center: The device goes online by querying required the registration center.
  • default: The mode is pre-configured in the system.
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207495

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next