No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pppoe-client (Cloud AP)

pppoe-client (Cloud AP)

Function

The pppoe-client command enables the PPPoE dialup function and configures account information.

The undo pppoe-client command disables the PPPoE dialup function.

By default, no PPPoE dialup account information is configured.

Format

pppoe-client username user-name password cipher password

undo pppoe-client

Parameters

Parameter Description Value
username user-name Specifies the PPPoE dialup user name.

The value is a string of 1 to 64 characters.

password cipher password Specifies the PPPoE dialup user password, in ciphertext.

The password is either a plaintext string of 1 to 32 characters or a ciphertext string of 24 to 68 characters.

Views

WAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In a scenario where a cloud AP is deployed, you can run the pppoe-client command to enable the PPPoE dialup function, and configure the user name and password. The cloud AP then can connect to the Internet through PPPoE dialup and register with the Agile Controller-Campus.

Precautions

Only one PPPoE dialup account can be configured.

Example

# Enable the PPPoE dialup function, and configure the user name test and password huawei@123.

<Huawei> system-view
[Huawei] interface wan0
[Huawei-WAN] pppoe-client username test password cipher huawei@123
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207480

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next