No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwtacacs-server timer quiet

hwtacacs-server timer quiet

Function

The hwtacacs-server timer quiet command sets the quiet interval before the primary server reverts to the active state.

The undo hwtacacs-server timer quiet command restores the default quiet interval before the primary server reverts to the active state.

By default, the quiet interval before the primary HWTACACS server reverts to the active state is 5 minutes.

Format

hwtacacs-server timer quiet interval

undo hwtacacs-server timer quiet

Parameters

Parameter

Description

Value

interval

Specifies the quiet interval before the primary server reverts to the active state.

The value is an integer ranging from 0 to 255, in minutes.

Views

HWTACACS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

If the primary server is unavailable, the device automatically switches services to the standby server and sends packets to the standby server. After the quiet interval before the primary server reverts to the active state expires, the device attempts to establish a connection with the primary server.

  • If the primary server is still unavailable, the device continues to send packets to the standby server until the next interval expires. Such a process repeats.
  • If the primary server is available, the device switches services to the primary server and sends packets to the primary server.

The quiet interval before the primary server reverts to the active state ensures that the primary server can be restored immediately and reduces the number of detection times during the switchover.

The default value is recommended.

Precautions

When the quiet interval of the active server is set to 0, if the active server fails, the device sends packets to the standby server. When the active server is recovered, the device does not connect to the active server, but still sends packets to the standby server until the standby server fails.

When you run the hwtacacs-server timer quiet command to change the quiet interval before the primary server reverts to the active state, the device does not check whether the HWTACACS server template is in use.

Example

# Set the quiet interval before the primary server reverts to the active state to 3 minutes.

<Huawei> system-view
[Huawei] hwtacacs-server template template1
[Huawei-hwtacacs-template1] hwtacacs-server timer quiet 3
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194897

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next