No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The cellular-network-profile command creates a cellular network profile or displays the view of an existing cellular network profile.

The undo cellular-network-profile command deletes a cellular network profile.

By default, no cellular network profile exists in the system.


cellular-network-profile name profile-name

undo cellular-network-profile { name profile-name | all }





name profile-name

Specifies the name of a cellular network profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot begin or end with double quotation marks (" ").


Delete all cellular network profiles.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure Hotspot 2.0 services on cellular networks. When connecting to the networks, user terminals can obtain network information from APs, which helps them to select desired networks.

Follow-up Procedure

Run the plmn-id command to configure the PLMN identifier and run the cellular-network-profile (Hotspot2.0 profile view) command to bind the cellular network profile to a Hotspot2.0 profile to make the cellular network profile take effect.


The device supports a maximum of 32 cellular network profiles.


# Create the cellular network profile cellular-network-profile1.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] cellular-network-profile name cellular-network-profile1
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207372

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next