No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
defence-profile (interface view)

defence-profile (interface view)

Function

The defence-profile command binds an attack defense profile to an interface.

The undo defence-profile command unbinds an attack defense profile from an interface.

By default, no attack defense profile is bound to an interface.

Format

defence-profile profile-name

undo defence-profile

Parameters

Parameter

Description

Value

profile-name

Specifies the name of an attack defense profile.

The attack defense profile must already exist.

Views

GE interface view, Eth-Trunk interface view, XGE interface view

Default Level

2: Configuration level

Usage Guidelines

The administrator can run the defence-profile command to bind an attack defense profile to an interface.

Example

# Create attack defense profile p1 and bind it to interface GE0/0/1.

<Huawei> system-view
[Huawei] defence-profile name p1
[Huawei-defence-profile-p1] quit
[Huawei] interface gigabitethernet 0/0/1
[Huawei-GigabitEthernet0/0/1] defence-profile p1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210108

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next