Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
shutdown (AP wired port link profile view)
Usage Guidelines
Usage Scenario
If malicious users launch attacks to the network through an RU's wired interface, the administrator can deliver the shutdown command on the central AP to shut down the interface.
Precautions
Data frames may be lost if you shut down an interface during data transmission. Exercise caution when you use the shutdown command.
The shutdown command still takes effect after an RU is restarted.
The shutdown command takes effect only on RU's wired interfaces working in endpoint or middle mode but not on those working in root mode.
Example
# Shut down the RU's wired interface.
<Huawei> system-view [Huawei] wlan [Huawei-wlan-view] port-link-profile name port-link1 [Huawei-wlan-port-link-prof-port-link1] shutdown Warning: This command does not take effect for root interfaces. [Huawei-wlan-port-link-prof-port-link1] quit [Huawei-wlan-view] wired-port-profile name wired-port1 [Huawei-wlan-wired-port-wired-port1] port-link-profile port-link1 [Huawei-wlan-wired-port-wired-port1] quit [Huawei-wlan-view] ap-group name ap-group1 [Huawei-wlan-ap-group-ap-group1] wired-port-profile wired-port1 gigabitethernet 0
Related Topics
Previous
