No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
application-group deny (SAC profile view)

application-group deny (SAC profile view)

Function

The application-group deny command configures the device to discard packets of all applications in group or the specific application in the group.

The undo application-group deny command cancels discarding packets of all applications in group or the specific application in the group.

By default, the device does not discard packets of applications.

Format

application-group group-name app-protocol { app-protocol-name | all } deny

undo application-group group-name app-protocol { app-protocol-name | all } deny

Parameters

Parameter

Description

Value

application-group group-name

Specifies the name of an application group.

The specified application group name must exist in the SAC signature file.

app-protocol app-protocol-name

Specifies the name of an application.

The specified application protocol must exist

all

All Applications in group

-

Views

SAC profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A WLAN transmits traffic of varied applications. The network administrator needs to know traffic usage of the applications to plan network capacity and locate problems on the network. In this situation, you can take application traffic control measures. If packets of a specified application need to be discarded, run the application-group deny command. You can also use the command to discard packets of a specified protocol type or a protocol type in a specified application group.

Precautions

If application-group remark (SAC profile view) or application-group car (SAC profile view) and application-group deny (SAC profile view) are both configured for an application, the rate limit and priority modification policy do not take effect for the application protocol packets, and the packets are discarded.

Prerequisites

SAC has been enabled, run the command sac enable.

Example

# Configure the device to discard packets of application qq_voip in SAC profile p1.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] sac-profile name p1
[Huawei-wlan-sac-prof-p1] application-group voip app-protocol qq_voip deny
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203738

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next