No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
telnet enable

telnet enable

Function

The telnet enable command enables Telnet on an RU.

The undo telnet enable command disables Telnet on an RU.

By default, Telnet is disabled on an RU.

Format

telnet enable

undo telnet enable

Parameters

None

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

You do not need to log in to a Telnet-enabled RU from a user terminal to maintain it locally. Instead, you can log in to the Telnet-enabled RU through Telnet to remotely configure and maintain it.

To improve login security, you are advised to run the undo stelnet server disable command to enable the STelnet server function and log in to the RU through STelnet.

Example

# Enable Telnet on an RU.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap-system-profile name ap-system1
[Huawei-wlan-ap-system-prof-ap-system1] telnet enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202251

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next