No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display telnet server status

display telnet server status

Function

The display telnet server status command displays the status and configuration of the Telnet server.

Format

display telnet server status

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

  • You can run this command to check whether the device functions as a Telnet server.
  • You can run this command to check the listening port number of the Telnet server if you have set the port number by running the telnet server port port-number command.

Example

# Display the status and configuration of the Telnet server.
<Huawei> display telnet server status
 TELNET IPV4 server                       :Enable
 TELNET server port                       :23
Table 2-21  Description of the display telnet server status command output

Item

Description

TELNET IPV4 server

IPv4 Telnet server.

TELNET server port

Listening port number of the Telnet server.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204053

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next