No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
channel-load-mode indoor

channel-load-mode indoor


The channel-load-mode indoor command sets the AP channel mode to indoor mode.

The undo channel-load-mode indoor command restores the AP channel mode to outdoor mode.

The default channel mode of an AP is outdoor mode.


channel-load-mode indoor

undo channel-load-mode indoor




WLAN view

Default Level

2: Configuration level

Usage Guidelines

In scenarios where indoor and outdoor boundaries are unclear, such as subway and train platforms, it is recommended that outdoor APs be deployed. When a large volume of data is transmitted, outdoor APs in outdoor channel mode have no sufficient channels to meet data transmission requirements. In this case, you can run the channel-load-mode indoor command to set the channel mode of the APs to indoor mode, so that data can be transmitted on more channels.


The AP is automatically reset after this command is executed, so exercise caution when using this command.

This function is supported only by the AP8030DN, AP8130DN, AP8050TN-HD, AP8050DN, AP8150DN, AP8050DN-S, AP8082DN and AP8182DN.


# Set the AP channel mode to indoor mode.
<Huawei> system-view
[Huawei] wlan
[Huawei-wlan] channel-load-mode indoor
Warning: Modifying the channel set mode may delete channels of AP radios in this
 domain and restart the AP. Continue?[Y/N]:y
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207485

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next