Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
interface
Parameters
| Parameter | Description | Value |
|---|---|---|
| interface-type interface-number | Specifies the type and number of an interface. The interface type and number can be closely next to each other or separated by a space character. |
- |
Usage Guidelines
Usage Scenario
After the specified interface view is displayed, you can set attributes for the interface.
Precautions
The interface command can display only the view of an existing physical interface and cannot create a physical interface.
The interface command can create a logical interface and display the view of the logical interface.
After an RU goes online, the central AP generates a virtual Ethernet interface. If you cannot enter the Ethernet interface view, run the wired-port-profile (WLAN view) command to enter the AP wired port profile view to configure the Ethernet interface.
Related Topics
Previous
