No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize arp-proxy enable

traffic-optimize arp-proxy enable


The traffic-optimize arp-proxy enable command enables ARP proxy on the device.

The undo traffic-optimize arp-proxy enable command disables ARP proxy on the device.

By default, ARP proxy is disabled.


traffic-optimize arp-proxy enable

undo traffic-optimize arp-proxy enable




Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

When an ARP Request packet is sent from a user or the network to another user, the central AP or RU enabled with ARP proxy can reply to this packet. Compared with the function of converting ARP multicast packets to ARP unicast packets, ARP proxy can reduce the number of times a sleeping terminal is awakened to save power.


# Enable ARP proxy on the device in the traffic profile p1.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] traffic-profile name p1
[Huawei-wlan-traffic-prof-p1] traffic-optimize arp-proxy enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199261

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next