Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
name (VLAN view)
Function
The name command configures a name for a VLAN.
The undo name command deletes a configured VLAN name.
By default, a VLAN does not have a name.
Parameters
| Parameter | Description | Value |
|---|---|---|
| vlan-name | Specifies the VLAN name. | The name is a string of 1 to 31 case-sensitive characters, spaces not supported. |
Usage Guidelines
If a device is configured with multiple VLANs for transmitting different services, you can name the VLANs in their corresponding VLAN views to facilitate service management. In this manner, you can check the deployed services of a VLAN by the VLAN name.
After VLANs are named, you can run the vlan vlan-name command in the system view to enter the view of a specific VLAN, and then check or modify the configuration of the VLAN.
Related Topics
Previous
