No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delay-suppression enable

delay-suppression enable


The delay-suppression enable command enables the alarm or event reporting delay function.

The undo delay-suppression enable command disables the alarm or event reporting delay function.

By default, the reporting delay function is enabled.


delay-suppression enable

undo delay-suppression enable




Alarm view or event view

Default Level

2: Configuration level

Usage Guidelines

If an alarm or an event is repeatedly generated, you can run the delay-suppression enable command to enable the reporting delay function to prevent a large number of repeated alarms or events from being reported to the NMS in a specified period.


# Enable the alarm reporting delay function.

<Huawei> system-view
[Huawei] alarm
[Huawei-alarm] delay-suppression enable
Info: alarm delay suppression has already been enabled
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203741

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next