No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent trap enable

snmp-agent trap enable

Function

The snmp-agent trap enable command enables the wireless access point to send traps.

The undo snmp-agent trap enable command restores the default setting.

The default configuration of the snmp-agent trap enable command can be checked by the display snmp-agent trap all command.

Format

snmp-agent trap enable

undo snmp-agent trap enable

Parameters

None.

Views

System view

Default Level

3: Management level

Usage Guidelines

To enable the trap function for all modules, run the snmp-agent trap enable command.

Example

# Enable the wireless access point to send traps.

<Huawei> system-view
[Huawei] snmp-agent trap enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202144

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next