No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp relay trust option82

dhcp relay trust option82


The dhcp relay trust option82 command enables Option 82 on the DHCP relay agent.

The undo dhcp relay trust option82 command disables Option 82 on the DHCP relay agent.

By default, Option 82 is enabled on the DHCP relay agent.


dhcp relay trust option82

undo dhcp relay trust option82




System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command is used on the DHCP relay agent to enable the Option 82 function. After receiving a DHCP packet that carries the Option 82 field but the giaddr field of the packet is 0, the DHCP relay agent processes the packet by default. Using the undo dhcp relay trust option82 command, the DHCP relay agent discards the packet.


DHCP has been enabled globally by using the dhcp enable command.


# Enable Option 82 trusted of the DHCP relay agent.

<Huawei> system-view
[Huawei] dhcp enable
[Huawei] dhcp relay trust option82
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208036

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next