No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-regroup

ap-regroup

Function

The ap-regroup command changes the group that an RU joins.

Format

ap-regroup { ap-name ap-name | ap-id ap-id } new-group new-group-name

Parameters

Parameter

Description

Value

ap-name ap-name

Specifies an RU name.

The RU name must exist.

ap-id ap-id

Specifies an RU ID.

The RU ID must exist.

The value is a string of 1 to 255 characters. When multiple RUs are selected, use commas (,) to separate RU IDs or use hyphens (-) to indicate continuous RU IDs. For example, 5,8,10-13,20 indicates the list of RUs with IDs 5, 8, 10, 11, 12, 13, and 20.

new-group new-group-name

Specifies the name of the new group to which the RU is added.

The AP group must exist.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the current AP group is not applicable to an RU or the RU is added to an incorrect group, you can run this command to delete the RU from the current AP group and add the RU to a new AP group.

Prerequisites

The AP group has been created using the ap-group command.

Configuration Impact

Changing the group of an RU will restart the RU and interrupt services. Exercise caution when you run the command.

Example

# Change the group that an RU joins to the AP group group1.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap-group name group1
[Huawei-wlan-ap-group-group1] quit
[Huawei-wlan-view] ap-regroup ap-name 1047-80b1-56a0 new-group group1
Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration
s of the radio, Whether to continue? [Y/N]:y 
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211584

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next