No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wids-spoof-profile

display wids-spoof-profile


The display wids-spoof-profile command displays information about a WIDS spoof SSID profile.


display wids-spoof-profile { all | name profile-name }


Parameter Description Value

Displays information about all WIDS spoof SSID profiles.


name profile-name

Displays information about a specified WIDS spoof SSID profile.

The WIDS spoof SSID profile must already exist.


All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display wids-spoof-profile command to view information about a WIDS spoof SSID profile.


# Display information about all WIDS spoof SSID profiles.

<Huawei> display wids-spoof-profile all
Profile name                   Reference
huawei                             0
office1                            1
Total: 2
Table 22-9  Description of the display wids-spoof-profile all command output
Item Description

Profile name

Name of a WIDS spoof SSID profile.


Number of times a WIDS spoof SSID profile is referenced.

# Display information about the WIDS spoof SSID profile huawei.

<Huawei> display wids-spoof-profile name huawei
ID      Pattern rule
0       ^HUAWE[1l]$
Total: 1
Table 22-10  Description of the display wids-spoof-profile name command output





Pattern rule

Matching rule for spoofing SSIDs.

To set the matching rule, run the spoof-ssid command.

Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195318

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next