No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
authentication event client-no-response action authorize

authentication event client-no-response action authorize

Function

The authentication event client-no-response action authorize command configures network access rights for users when the 802.1X client does not respond.

The undo authentication event client-no-response action authorize command restores the default setting.

By default, no network access right is configured for users when the 802.1X client does not respond.

Format

authentication event client-no-response action authorize vlan vlan-id

undo authentication event client-no-response action authorize

Parameters

Parameter Description Value
vlan vlan-id

Specifies a VLAN ID. When this parameter is specified, users can access only the resources in the VLAN.

The value is an integer that ranges from 1 to 4094.

Views

802.1X access profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the 802.1X client does not respond, users cannot pass authentication and thereby have no network access right. Before being successfully authenticated, some users may need certain basic network access rights to download client software and update the antivirus database. The network access rights can be configured for the users when the 802.1X client does not respond, so that the users can access specified network resources.

Precautions

Wireless 802.1X authentication does not support this function.

This function takes effect only for users who go online after this function is successfully configured.

When an 802.1X client does not respond, the redirection ACL function is not supported. For details about the function, see redirect-acl.

Example

# In the 802.1X access profile d1, configure the device to assign the network access rights specified in VLAN 10 for users when the 802.1X client does not respond.

<Huawei> system-view
[Huawei] vlan batch 10
[Huawei] dot1x-access-profile name d1
[Huawei-dot1x-access-profile-d1] authentication event client-no-response action authorize vlan 10
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207071

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next