No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ips associated pre-defined

ips associated pre-defined

Function

The ips associated pre-defined command sets a check item for a predefined associated signature.

The undo ips associated pre-defined command cancels the settings of the check item for a predefined associated signature.

Format

ips associated pre-defined signature-id signature-id { threshold threshold-value | interval interval-value | correlateby { source | destination | source-destination } } *

undo ips associated pre-defined { signature-id signature-id | all }

Parameters

Parameter Description Value
signature-id signature-id Specifies the ID of a predefined associated signature.

The value is an integer ranging from 1025 to 16777215.

threshold threshold-value Specifies the threshold for signature association times.

The value is an integer ranging from 1 to 2000. The default value is 30.

interval interval-value Specifies the measurement period. If the number of times the associated signature is detected exceeds threshold-value within this period, the predefined associated signature is matched.

The value is an integer ranging from 1 to 7200. The default value is 60.

correlateby Indicates the association mode.

The default mode is source-destination.

source Collects statistics on the number of times that the associated signature is matched for the same source IP address. -
destination Collects statistics on the number of times that the associated signature is matched for the same destination IP address. -
source-destination Collects statistics on the number of times that the associated signature is matched for the same source and destination IP addresses. -
all Restores the check items of all predefined associated signatures to the default values. -

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If the check items of a predefined associated signature cannot meet requirements, you can run the ips associated pre-defined command to modify the check items.

During the IPS signature database update, if the configured predefined associated signature does not exist in the IPS signature database, the corresponding configurations are reserved but do not take effect. When the current configurations are queried, the following message is displayed: Invalid configuration. The specified signature (signature-id) does not exist in the current library. Please check and delete it.

Example

# Configure check items for a predefined associated signature.

<Huawei> system-view
[Huawei] ips associated pre-defined signature-id 16042 threshold 20 interval 30 correlateby source-destination
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202172

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next