No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dot1x timer quiet-period

dot1x timer quiet-period

Function

The dot1x timer quiet-period command configures the quiet period for 802.1X users who fail to be authenticated.

The undo dot1x timer quiet-period command restores the default quiet period.

By default, the quiet period is 60 seconds for 802.1X users who fail to be authenticated.

Format

dot1x timer quiet-period quiet-period-times

undo dot1x timer quiet-period

Parameters

Parameter

Description

Value

quiet-period-times

Sets the quiet period for 802.1X users who fail to be authenticated.

The value is an integer that ranges from 1 to 3600, in seconds.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If an 802.1X authentication user fails to be authenticated consecutively within a short period, the system is affected and a large number of duplicated authentication failure logs are generated.

After the quiet function is enabled using the dot1x quiet-period command, if the number of times that an 802.1X user fails to be authenticated within 60s exceeds the upper limit (configured using the dot1x quiet-times command), the device discards the user's 802.1X authentication request packets for a period to avoid frequent authentication failures.

Example

# Set the quiet period to 100 seconds for 802.1X users who fail to be authenticated.

<Huawei> system-view
[Huawei] dot1x timer quiet-period 100
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208380

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next