No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rate-limit

rate-limit

Function

The rate-limit command configures the rate limit for upstream and downstream packets of all STAs or each STA on a VAP.

The undo rate-limit command restores the default rate limit for upstream and downstream packets of all STAs or each STA on a VAP.

By default, the rate limit for upstream and downstream packets of all STAs on a VAP is 4294967295 kbit/s, and that of each STA is 4294967295 kbit/s.

Format

rate-limit { client | vap } { up | down } rate-value

undo rate-limit { client | vap } { up | down }

Parameters

Parameter

Description

Value

client

Specifies a STA on a VAP.

-

vap

Specifies all STAs on a VAP.

-

up

Specifies the rate limit for upstream packets on a VAP.

-

down

Specifies the rate limit for downstream packets on a VAP.

-

rate-value

Specifies the limited rate of packets.

The value is an integer that ranges from 64 to 4294967295, in kbit/s.

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the rate-limit command to limit the rate of upstream and downstream packets for all STAs or each STA on a VAP to protect network bandwidth resources.

Precautions

The limited rate does not take effect for STAs that go online before the rate-limit command is configured. To make this configuration take effect for a STA, enable the STA to go online again.

The rate limit configured for each STA on a VAP does not take effect for multicast packets.

Example

# Set the rate limit of upstream packets to 4294967295 kbit/s for all STAs on a VAP in the traffic profile p1.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] traffic-profile name p1 
[Huawei-wlan-traffic-prof-p1] rate-limit vap up 4294967295
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204533

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next