No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mesh-proxy trackside-equip

mesh-proxy trackside-equip


The mesh-proxy trackside-equip command adds a proxied ground device on the vehicle-mounted AP.

The undo mesh-proxy trackside-equip command removes a proxied ground device from the vehicle-mounted AP.

By default, no proxied ground device is added on the vehicle-mounted AP.


mesh-proxy trackside-equip mac-address mac-address vlan vlan-id

undo mesh-proxy trackside-equip mac-address { mac-address | all }






Specifies the MAC address of a proxied ground device.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits. The MAC address cannot be FFFF-FFFF-FFFF, 0000-0000-0000, or a multicast MAC address.


Specifies the VLAN ID of a proxied ground device.

The value is an integer that ranges from 1 to 4094.


Removes all proxied ground devices.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a train switches the forward direction, the working vehicle-mounted AP broadcasts an RARP message carrying MAC addresses of the proxied ground devices to the vehicle-mounted switch through a wired interface. After receiving the message, the vehicle-mounted switch updates MAC forwarding entries. In this way, the vehicle-mounted switch can forward data packets to the working vehicle-mounted AP.

If the proxied ground devices are incorrectly configured on the vehicle-mounted AP, the vehicle-mounted switch will forward data traffic to the vehicle-mounted AP in dormancy state, causing service interruption.

You can add MAC addresses of a maximum of 16 proxied ground devices on a vehicle-mounted AP.


# Add the ground device with MAC address 0000-0000-0001 in VLAN 100 on the vehicle-mounted AP as a proxied device.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] mesh-proxy trackside-equip mac-address 0000-0000-0001 vlan 100
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207668

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next