No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
authentication event authen-server-up action re-authen

authentication event authen-server-up action re-authen

Function

The authentication event authen-server-up action re-authen command enables the device to re-authenticate users in the survival state when the authentication server changes from Down or forcible Up to Up.

The undo authentication event authen-server-up action re-authen command restores the default setting.

By default, the device does not re-authenticate users in the survival state when the authentication server changes from Down or forcible Up to UP.

Format

authentication event authen-server-up action re-authen

undo authentication event authen-server-up action re-authen

Parameters

None

Views

Authentication profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The users in the survival state can only access limited network resources after the device assigns specified network access rights to users who fail authentication because the authentication server is Down. To meet the users' normal network access requirements, the device needs to re-authenticate users in the survival state in real time when the authentication server turns Up.

After the status of the RADIUS server is set to Down, you can run the radius-server dead-time dead-time command to set the interval for the RADIUS server to return to the active state. When the value of dead-time expires, the status of the RADIUS server is set to forcible Up. When the server successfully transmits and receives packets, the status is set to Up. The device can re-authenticate users in the survival state when the server changes from Down or forcible Up to Up. Re-authentication cannot be triggered when the server turns from Down to forcible Up.

Prerequisites

The radius-server testuser command has been configured in the RADIUS server template so that the device can detect that the authentication server changes from Down to Up.

Precautions

This function takes effect only for users who go online after this function is successfully configured.

Example

# In the authentication profile authen1, enable the device to re-authenticate users when the authentication server turns Up from Down or forcible Up.

<Huawei> system-view
[Huawei] authentication-profile name authen1
[Huawei-authentication-profile-authen1] authentication event authen-server-up action re-authen
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207958

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next