Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display radius-server accounting-stop-packet
Function
The display radius-server accounting-stop-packet command displays information about accounting-stop packets on the RADIUS server.
Usage Guidelines
The display radius-server accounting-stop-packet command output helps you check configurations or isolate faults.
Example
# Display the accounting-stop packets with the IP address being 10.138.104.32.
<Huawei> display radius-server accounting-stop-packet ip 10.138.104.32 ------------------------------------------------------------------------------ Time Stamp Resend Times Session Time Username ------------------------------------------------------------------------------ 1980409 6 22 g@rds ------------------------------------------------------------------------------ Total: 1, printed: 1
Table 26-26 Description of the display radius-server accounting-stop-packet command output
Item |
Description |
|---|---|
Time Stamp |
Timestamp of an accounting-stop packet. |
Resend Times |
Number of times that accounting-stop packets have been retransmitted. |
Session Time |
Session time, in seconds. |
Username |
User name. |
Previous
