No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dot1x eap-notify-packet

dot1x eap-notify-packet

Function

The dot1x eap-notify-packet command configures the device to send EAP packets with a code number to 802.1X users.

The undo dot1x eap-notify-packet command restores the default configuration.

By default, the device does not send EAP packets with a code number to users.

Format

dot1x eap-notify-packet eap-code code-number data-type type-number

undo dot1x eap-notify-packet [ eap-code code-number data-type type-number ]

Parameters

Parameter

Description

Value

eap-code code-number

Specifies the code number in EAP packets sent by the device.

The value is an integer that ranges from 5 to 255, the default value is 255.

data-type type-number

Specifies the data type in EAP packets sent by the device.

The value is an integer that ranges from 1 to 255, the default value is 255.

Views

802.1X access profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a non-Huawei device used as the RADIUS server sends RADIUS packets with attribute 61, EAP packet code number 0xa (hexadecimal notation, 10 in decimal notation), and data type being 0x19 (hexadecimal notation, 25 in decimal notation) to the device, run the dot1x eap-notify-packet command on the device so that the device can send EAP packets with code number 0xa and data type 0x19 to users. If the dot1x eap-notify-packet command is not executed, the device does not process EAP packets of this type and users are disconnected.

Precautions

The device can only send EAP packets with code number 10 and data type 25.

Example

# In the 802.1X access profile d1, configure the device to send EAP packets with code number 10 and data type 25 to users.

<Huawei> system-view
[Huawei] dot1x-access-profile name d1
[Huawei-dot1x-access-profile-d1] dot1x eap-notify-packet eap-code 10 data-type 25
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 209316

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next