No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display radius-server configuration

display radius-server configuration

Function

The display radius-server configuration command displays configuration information about a RADIUS server template.

Format

display radius-server configuration [ template template-name ]

Parameters

Parameter

Description

Value

template template-name

Specifies the name of a RADIUS server template.

If this parameter is not specified, configuration information of all RADIUS server templates is displayed.

The RADIUS server template must already exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the configuration of a RADIUS server template is completed or a RADIUS fault needs to be rectified, you can run this command to check whether the configuration of the RADIUS server template is correct.

Example

# Display configuration information about the RADIUS server template named shiva.

<Huawei> display radius-server configuration template shiva
  ------------------------------------------------------------------------------
  Server-template-name          :  shiva
  Protocol-version              :  standard
  Traffic-unit                  :  B
  Shared-secret-key             :  %^%#O09i(W[^YT4g#Z37Nct9$IK#TH(-B6-1|<;q|D)"%^%#
  Group-filter                  :  class
  Timeout-interval(in second)   :  5
  Retransmission                :  2
  EndPacketSendTime             :  0
  Dead time(in minute)          :  5
  Domain-included               :  YES
  NAS-IP-Address                :  -
  Calling-station-id MAC-format :  xxxx-xxxx-xxxx
  Called-station-id MAC-format  :  XX.XX.XX.XX.XX.XX
  NAS-Port-ID format            :  New 
  Service-type                  :  - 
  WLAN Called-station-id format :  ap-mac:ssid
  Server algorithm              :  master-backup 
  Detect-interval(in second)    :  60 
  Detect up-server(in second)   :  0
  Detect timeout(in second)     :  3
  Testuser-username             :  huawei
  Testuser-ciperpwd             :  %^%#.5*EDl^j_WXg[#Z>plj8;k|8.s*ju<_F~g9k`0*9%^%#
  Chargeable-user-identity      :  Not Support
  CUI Not reject                :  No
  Authentication Server 1       :  10.7.66.66     Port:1812  Weight:80  [up]
                                   Vrf:- LoopBack:NULL Vlanif:NULL
                                   Source IP: ::
  Authentication Server 2       :  10.7.66.67     Port:1812  Weight:80  [up]
                                   Vrf:- LoopBack:NULL Vlanif:NULL
                                   Source IP: ::
  Accounting Server     1       :  10.7.66.66     Port:1813  Weight:80  [up]
                                   Vrf:- LoopBack:NULL Vlanif:NULL
                                   Source IP: ::
  Accounting Server     2       :  10.7.66.67     Port:1813  Weight:80  [up]
                                   Vrf:- LoopBack:NULL Vlanif:NULL
                                   Source IP: ::
  ------------------------------------------------------------------------------ 
Table 26-28  Description of the display radius-server configuration template template-name command output

Item

Description

Server-template-name

Name of a RADIUS server template. To configure this item, run the radius-server template command.

Protocol-version

RADIUS protocol version:
  • standard
  • huawei
  • iphotel
  • portal

Traffic-unit

Traffic unit in the RADIUS server template:

  • B: Byte
  • KB: Kilobyte
  • MB: Megabyte
  • GB: Gigabyte

To configure this item, run the radius-server traffic-unit command.

Shared-secret-key

Shared key in the RADIUS server template. To configure this item, run the radius-server shared-key command.

Group-filter

Filtering field of a user group. Currently, only the class field can be used as the filtering field of a user group.

Timeout-interval(in second)

Response timeout period of a RADIUS server. To configure this item, run the radius-server retransmit timeout dead-time command.

Retransmission

Number of times RADIUS packets are retransmitted. To configure this item, run the radius-server retransmit timeout dead-time command.

EndPacketSendTime

Number of times RADIUS accounting-stop packets are retransmitted. To configure this item, run the radius-server accounting-stop-packet resend command.

Dead time(in minute)

Interval for the primary RADIUS server to revert to the active status. To configure this item, run the radius-server retransmit timeout dead-time command.

Domain-included

Whether the RADIUS user name contains the domain name.

  • YES: The user name contains the domain name.
  • NO: The user name does not contain the domain name.
  • Original: The device does not modify the user name entered by the user.

To configure this item, run the radius-server user-name domain-included command.

NAS-IP-Address

NAS IP address in RADIUS packets.

Calling-station-id MAC-format

Encapsulation format of the MAC address in the calling-station-id attribute of RADIUS packets.

Called-station-id MAC-format

Encapsulation format of the MAC address in the called-station-id attribute of RADIUS packets. To configure this item, run the called-station-id mac-format command.

NAS-Port-ID format

Format of the NAS-Port-ID attribute on the RADIUS server.

  • New: Uses the new format of the NAS-Port-ID attribute.
  • Old: Uses the old format of the NAS-Port-ID attribute.

To configure this item, run the radius-server nas-port-id-format command.

Service-type

Service type.

WLAN Called-station-id format

Encapsulation content of the called-station-id (30) attribute in RADIUS packets.

To configure this item, run the called-station-id wlan-user-format command.

Server algorithm

Algorithm for selecting RADIUS servers.

  • master-backup: Specifies the algorithm for selecting RADIUS servers as packet-based primary/secondary.
  • master-backup based-user: Specifies the algorithm for selecting RADIUS servers as single user-based primary/secondary.
  • loading-share: Specifies the algorithm for selecting RADIUS servers as packet-based load balancing.
  • loading-share based-user: Specifies the algorithm for selecting RADIUS servers as single user-based load balancing.

To configure this item, run the radius-server algorithm command.

Detect-interval(in second)

Automatic detection interval for RADIUS servers in Down status. To configure this item, run the radius-server detect-server command.

Detect up-server(in second) Automatic detection interval for RADIUS servers in Up status. To configure this item, run the radius-server detect-server up-server interval command.
Detect timeout(in second) Timeout period for automatic RADIUS server detection packets. To configure this item, run the radius-server detect-server timeout command.
Testuser-username User name for automatic RADIUS server detection. To configure this item, run the radius-server testuser command.
Testuser-ciperpwd User password for automatic RADIUS server detection. To configure this item, run the radius-server testuser command.
Chargeable-user-identity

Whether the device supports the CUI attribute. The value can be:

  • Not Support: The device does not support the CUI attribute.
  • Support: The device supports the CUI attribute.

To configure this item, run the radius-server support chargeable-user-identity command.

CUI Not reject

Whether the device does not process the CUI attribute. The value can be:

  • No: The device processes the CUI attribute.
  • Yes: The device does not process the CUI attribute.

To configure this item, run the radius-server support chargeable-user-identity command.

Authentication Server 1

IP address, interface number, weight, status, source interface, and source IP address of the primary RADIUS authentication server. To configure this item, run the radius-server authentication command.

Authentication Server 2

IP address, interface number, weight, status, source interface, and source IP address of the secondary RADIUS authentication server. To configure this item, run the radius-server authentication command.

Accounting Server 1

IP address, interface number, weight, status, source interface, and source IP address of the primary RADIUS accounting server. To configure this item, run the radius-server accounting command.

Accounting Server 2

IP address, interface number, weight, status, source interface, and source IP address of the secondary RADIUS accounting server. To configure this item, run the radius-server accounting command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202733

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next