No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
terminal debugging

terminal debugging

Function

The terminal debugging command enables debugging message display on the user terminal.

The undo terminal debugging command disables debugging message display on the user terminal.

By default, debugging message display is disabled on the user terminal.

Format

terminal debugging

undo terminal debugging

Parameters

None

Views

User view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can run the terminal debugging command to enable debugging message display on the user terminal to view system debugging message and locate faults.

Prerequisites

The terminal monitor command has been executed to enable display of logs, traps, and debugging message output on the user terminal.

Example

# Enable debugging message display on the user terminal.

<Huawei> terminal debugging
Info: Current terminal debugging is on.
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202430

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next