No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ntp-service access limited

ntp-service access limited

Function

The ntp-service access limited command enables control on the rate of incoming NTP packets.

The undo ntp-service access limited command disables control on the rate of incoming NTP packets.

By default, control on the rate of incoming NTP packets is disabled.

Format

ntp-service access limited acl-number

undo ntp-service access limited

Parameters

Parameter Description Value
acl-number Indicates the basic access control list (ACL) number for IPv4 addresses. The value is an integer that ranges from 2000 to 2999.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the KOD function is enabled on the server, you can run the ntp-service access limited command to enable control on the rate of incoming NTP packets. When the rate of incoming NTP packets reaches the upper threshold, the server sends the kiss code.

Precautions

Before enabling control on the rate of incoming NTP packets, check the ACL rule configuration. When the ACL rule is deny, the server sends the kiss code DENY. When the ACL is permit and the rate of incoming NTP packets reaches the upper threshold, the server sends the kiss code RATE.

Example

# Enable control on the rate of incoming NTP packets.

<Huawei> system-view
[Huawei] ntp-service access limited 2005
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210328

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next